
Electrical fault finding in the Perth Hills
Your safety switch drops when it rains. Lights flicker. Half the house has gone dead. We trace the fault, fix it and test that circuit again.
WA electrical contractor licence EC15326 · Same Day Trades’ own licensed electricians · a quote on site before any work starts
- The work
- Switchboards, RCDs, smoke alarms, fans, lights and power points
- Licence
- WA electrical contractor EC15326
- Where
- Kalamunda, Mundaring, Roleystone, Armadale and the hills between
- Quotes
- An electrician looks first, then quotes



Faults traced by our own electricians
Same Day Trades sends one of its own licensed electricians, in this uniform and one of these vans. The work is done under licence EC15326.
Licence WA electrical contractor EC15326
About Simon and the teamBefore you call, try this
- Note what was on when it tripped, and whether it happens when it rains
- Switch off and unplug everything on that circuit, then reset the RCD
- Plug things back in one at a time. If one appliance trips it, that’s the likely cause
- If it still trips with nothing plugged in, it’s a wiring fault, and that needs an electrician
Never hold an RCD on or tape it up. It trips because it’s found something.
Board first, then outwards
We test each circuit at your board, then work out to the points, lights and outdoor fittings until the fault shows itself. Water in an outdoor point or garden light, a worn appliance and old wiring are common ones.
Once it’s found, you get the fix and its price before any work starts. If your board itself is to blame, we quote an upgrade.

When it happens matters
- What happens, and when (after rain, when the kettle goes on)
- A photo of the open switchboard
- Which part of the house loses power
A pattern, like trips after rain or whenever one appliance runs, points us at the right circuit.
The WA checklist for the fault
What we’ll look at when we visit
Safety switches (RCDs)
Every WA home needs at least two RCDs, and a home being sold needs every power point and lighting circuit covered.
We’ll check How many RCDs there are, and what they cover.
The switchboard
An old board with ceramic fuses, or no room for RCDs, is replaced with a new one. Newer boards are looked over and tested.
We’ll check Its age, its room for RCDs, and a test.
Send us two photos. Your open switchboard, with any tripped switch showing, and a smoke alarm label with its date on it.
Get a quote for the faultOur electrician checks each row on site, then quotes.
Faults found, in customers’ words
Had a sudden RCD trip, RCD wouldn't reset, … had the power off and RCD replaced …
He tested the toaster to make sure it wasn't an issue, he advised me of potential maintenance items and their timeframe such as smoke detectors. Very professional throughout, 10/10 will use his services again.
… They kept us informed about the progress of the job & always asked us if it was okay to turn off the power, when working with cables/wiring for safety. … The House was built in 1951, and had most of the original wiring.
We were given 3 Quotes after the Project Manager (N.F.) checked the wiring in the roof-space.. He took photos on his mobile phone & showed us exactly how bad & degraded the wiring was. …
I've just had considerable electrical work done to my home, exhaust fans, additional power points and a surge arrestor. The team of 3 who performed the work were highly professional. They removed all the waste, talked me through each installation and left their work areas spotless. They also found and repaired a potential fire hazard at one instalment, exposed copper conduit near a beam. For that, there are no words to express my gratitude. I'm happy to recommend this company , you'll be in good hands if you need work done.
From the trip to the fix
Say when it happens
After rain, when the kettle goes on, at night. When it happens narrows the search.
An electrician booked
Our office calls back and books the visit.
Found, then priced
We test at your board and work out to the fault, then give you the fix and its price.
Fixed and tested again
Once you say yes, we fix it and test that circuit again.

Why a fault is priced once it’s found
- How long the fault takes to find
- What the fix is, from a point or a light to a length of cable or a new board
- Outdoor runs to sheds, pumps and garden lights
- Whether the board needs an upgrade
Tripping and flickering, answered
Something else going on? Ring 0480 024 272, or describe it in the form.
Why does my safety switch trip when it rains?
Water is getting into something outdoors, a power point, a garden light, a sensor light or a cable. We find which one and fix it.
Why do my lights flicker?
A loose connection, a failing fitting or a dimmer that doesn’t suit your globes are common causes. We test that circuit and fix what we find.
Part of the house has no power. What should I check?
Your switchboard, for a tripped RCD or breaker. Try resetting it once. If it trips again, leave it off and book an electrician.
Tell us what’s tripping
Say what happens and when, and add a photo of your open board. Our office calls back to book a visit.
What narrows it down
- What happens, and when (after rain, when the kettle goes on)
- A photo of the open switchboard
- Which part of the house loses power
You get a price for the fix once we know what it is.
Thanks, we’ve got your details.
We’ll call to talk it through and book a licensed electrician to come out, look at the job and quote.
